Dynamics Assignment Example | Topics and Well Written Essays - 1500 words

Dynamics - Assignment ExampleCalculate the horizontal and vertical components of the mass. If the shaft rotating at 200RPM, determine the force-out excreted on the shaft.Ashaft rotating at 500RPM carries masses of A = 3kg, B = 4kg and C = 2kg at distances of 0.9m, 0.7m, and 1.7m from the shaft respectively. The angles of A, B, and C respect to horizontal are 40o, 130o, and 290o respectively.In an Epicyclic gearbox, the pack gear A is fixed and the input shaft is connected to the Sun gear S which rotates at 1800RPM. The Sun gear has 60 teeth and in that location are three planet gears P. The gear ratio between the Sun gear and Planet gear is 21.The input power is 45kW and the might is 85%. Sketch a simple arrangement and calculatePass each questions in section A (including all parts) must be try and answered. The assessment criteria and the learning outcomes for Pass grade must be met and fundamental understanding must be present on this assignment.Merit All questions in section A (including all parts) and question B7 in section B must be answered with reasonable accuracy and with no major errors. A swell presentation and good communication of assignment is essential. The assessment criteria for Pass and Merit grade must be met and knowledge and understanding must be demonstrated on this assignment. notation All questionsin section A and section B (B7 & B8) must be answered fully correct with no errors. All the criteria for Pass, Merit and Distinction must be met. A neat presentation of assignment including any references/ bibliography is essential. All the answers in section B must be synthesised and clearly justified. All the SI units must be clearlyshown in front of calculations, showing full understanding on this